Kikuyumoja

Well, talking about display protection foils in my previous post, I thought about trying some non-destructive methods on my own book – also with the intention to create something dead simple, low cost and easy-to-rebuild for anyone interested. After all, what I was looking for is a simple solution to an existing problem.

ATTENTION:
the following mod is VERY jua kali and is for demonstration purposes only!

I first tried to use a rather huge sticker I’ve found in one of my drawers (btw, THX DED!) to “mold” the frame…

Cutting and folding this one requires decent tools and lots of patience and the right adhesive on the sticker. So I skipped it and used normal fabric tape to make the frame in which the simple cover is supposed to glide around.

Obviously, this is just a demonstration to show you what I meant in my previous post. Something that protects the screen when the notebook is closed, and what is stored away – but not completely removed! – when the screen is in use.

I was looking for a stronger material/foil/paper that could be flexible enough to move around the edges of the screen and ended up using some pages from a brochure on water problems (~maji ni maisha).
Now, this is the sweet part of the whole idea: ADVERTISEMENT! Companies could print their ads on this and give it away for free + a detailed installation instruction.
Maybe instead of glueing this onto the display frame, it could just as well be some sort of silicone skin which would then be pulled over the display and add a protective and moveable shield (and yes, we’re not talking about BestSkinEver bubudius or 3M® Vikuiti display protection). Just a fast and simple add-on for the 2nd most important user-interface (next to the keyboard) on a computer: the display.

Or as Hash normally puts it with his Web 2.0 recommendations:
“It’s fast, it’s simple, it wins. Try it!” :-)

a.k.a. Installing WinXP according to HP’s logic…

HP shipped the notebook with the usual recovery DVD which contains a pre-installed WinXP environment. Upon insertion into the dvd drive, it tries to overwrite the whole harddisk with a single partition. Why? Because the notebook came shipped with a single partition. A full 80 GB partition (ok, ~74 once formatted).

Now, for those of us who have more specific needs and for example don’t keep the (dynamic) user files on the same partition, there are of course ways to partition the HDD and put those files that need to stay on the HDD for longer onto one of them. Just imagine this scenario where you would keep the needed drivers, applications and your own personal files (text, music, video, etc.) and settings on a different partition which is save and wouldn’t be affected once you’d have to reinstall Windows. And those of us who are forced to use this OS (~ the majority), know about the need to frequently reinstall Windows. I think the average user does that at least every year unless you never use your machine and/or never install any new software (of course, those who just want to have a stable system have their small selected choice of programms they are using and otherwise never change a running system).

Now, WinXP normally provides us with a menue where you can choose the partition and settings for a new installation. Not so with the recovery DVD! No menue during the Windows installation routine where you could select the partitioning process and then scale the HDD down to your desired choices. Is this the OEM Version that I bought? I DON’T WANT A SINGLE PARTITION.

And there are of course ways to single-out the installation files of the provided recovery DVD and e.g. make a small Isobuilder CD which only contains the WinXP installation files without any HP add-ons. But it should be easier than that….

So I wrote to HP, asking for a workaround and you know what they replied?

Thank you for contacting Hewlett-Packard’s Commercial Solutions Center.

A partition is a logical section of a hard disk on which Windows can write data. Every hard disk must be partitioned before it can be used. Often, a hard disk is set up as one big partition, but you can divide a hard disk into multiple partitions. When you partition a hard disk, you decide how much space to allocate to each partition.

For example, assume that your computer has an 80-GB hard disk. If you purchased your computer with Windows XP already installed, or if you installed Windows XP using the default choices during installation, the hard disk likely has a single partition that takes up all of the 80 GB on the disk. However, you could divide that same disk into multiple partitions—maybe a 40-GB partition to hold Windows and program files, a 20-GB partition to hold your documents, and another 20-GB partition for future use.

When you partition a hard disk, you do not have to use all of the space on the hard disk at once. For example, on the 80-GB hard disk, you could create a single 40-GB partition and leave the rest of the space unpartitioned. Unpartitioned space on a hard disk is called unallocated space.

Please install the Operating System using the CD shipped along with the Notebook. Please perform the steps provided in the below web link:

http://support.microsoft.com/kb/316941/EN-US/

Note: HP does not support more than One partition. (<= the vital information I needed to get)

=> Exactly: a copy & paste answer that explains what partitioning is all about…..HELLO? Hewlett-Packard? WTF is wrong with your customer service? Aren’t you human beings with a brain? Are you located in the USA where the typical user is assumed to be as stupid as the president of this great nation?
I gave you a very detailed question that would point out that you are not dealing with the average Joe User, but someone who KNOWS what partitioning is all about and needs an answer instead of basic knowledge that I could even google.
The provided DVD indirectly supports more than one partition because – and this is the solution to my problem – I initially thought that it sort of overwrites the HDD with an image file (~think of Northon Ghost images) without asking for partitions. But what it does instead is that it just runs this simple script in the beginning of the installation which formats the first partition on the drive. Bingo!

Now, all we need to do is use another programme (freeware tools, Partition Magic, another Windows version, Knoppix, Ubuntu, etc.) which just partitions the HDD. After the HDD is partitioned, the recovery DVD only concentrates on the first partition (=> yes, it does not support more than one partition, but it also ignores all other partitions – which is exactly what I wanted) and installs HP’s castrated OEM version of WinXP Pro.

I really wonder WHY they change these WinXP installation routines – I think it would be wiser to leave it the way it normally comes with WinXP then additionally explain partitioning procedures to the average user. After all, there are so many other unimportant details they are explaining and that don’t differ on most computers and lots of papers/manuals that come along with the notebooks. And while I agree that most problems are just software related and which btw explains why MS introduced this “Windows compatibility” programme with hardware driver tests etc., the manufacturers like HP should just concentrate on the hardware and explain it in full detail. If you open the manual, there’s about half of the explanations about “using software” instead of simple pictures that explain how to e.g. remove the MultiBay, how to upgrade memory, how to save battery runtime (by removing the battery as long as it has an external power supply) and/or how identify hardware issues and enable customers to deliver a detailed error report. I think they could greatly save on customer service if customers were given more detailed informations on how to solve hardware problems on their own (and yes, they DO have a dissassembly manual for download online).

But instead, what HP did was referring me to the MS-knowledge base which just provides answers for a normal WinXP installation, not for HP’s limited WinXP version….